|
ptfe Rulon J,孤立絕緣體ptfe,印刷機零件ptfe,軸承ptfe
Rulon J
聚四氟乙烯
Saint Gobain Performance Plastics
產品說明
Rulon® J is an all-polymeric reinforced, dull gold colored PTFE compound that operates exceptionally well against soft mating surfaces such as 316 stainless steel, aluminum, mild steel, brass and other plastics. The unique "shaft friendly" material is also low in friction and wear and self-lubricating.
Rulon® J has one of the lowest coefficients of friction of most reinforced PTFE materials. This makes it ideally suited for start/stop applications where stick-slip must be eliminated. The tribological properties of this material also make it suitable for both bearing and wear component applications.
總體
材料狀態 • 已商用：當前有效
供貨地區 • 北美洲
性能特點 • 低摩擦系數 • 耐磨損性良好 • 自潤滑
• 電氣部件 • 密封 • 營業設備
用途 • 電器用具 • 汽車領域的應用：
• 軸承
• 孤立絕緣體ptfe,印刷機零件ptfe,軸承ptfe • 印刷機零件
外觀 • 金色
形式 • 可定制外形
加工方法 • 機器加工 • 擠出
物理性能 額定值單位制 測試方法
比重 1.95g/cm³ ASTM D792
吸水率 (24 hr) 0.0% ASTM D570
機械性能 額定值單位制 測試方法
抗張強度 (屈服) 13.8MPa ASTM D638
伸長率 (斷裂) 180% ASTM D638
摩擦系數 0.16 ASTM D1894
負載變形 (10 MPa) 3.00% ASTM D621
熱性能 額定值單位制 測試方法
線形膨脹系數 ASTM D696
流動: 26 到 93°C 0.00012cm/cm/°C
流動: 26 到 149°C 0.00012cm/cm/°C
橫向: 26 到 93°C 0.000088cm/cm/°C
橫向: 26 到 149°C 0.000094cm/cm/°C
導熱系數 0.29W/m/K ASTM C177
補充信息
Temperature, Typical Range: -400° to 550°F
Flammability, ASTM D635: non-flammable
Maximum Pressure(P): 750 psi
Maximum Velocity with no load (V-SFM): 400 ft/min
Maximum PV (PxV): 7500 psi x ft/min
Shaft Hardness - Minimum: Rb25
Shaft Finish recommended: 8 ot 16 Ra
Shaft Material: 316 stainless steel and non-ferrous
Chemical Resistance: chart available
Coef. of Friction, ASTM D1894, static & dynamic: 0.12 to 0.20
備注
1 一般屬性：這些不能被視為規格。
1 / 1
|
