|
ptfe W2,泵件PTFE, 密封PTFE, 水箱PTFE, 電氣部件PTFE, 汽車領域的應用PTFE, 軸承PTFE Rulon W2
聚四氟乙烯
Saint Gobain Performance Plastics
產品說明
Rulon® W2 is a black PTFE-based material developed for use in fresh-water applications. It exhibits low friction and excellent wear characteristics (one of the lowest wear rates in fresh water) as well as good thermal dissipation, preventing shaft distress. Its properties are enhanced when wet.
Rulon® W2 is DWGV (European) certified for applications in contact with drinking water.
It is compatible with most metal substrates and soft mating surfaces. Rulon W2 is a good alternative to Rulon J when superior chemical resistance is needed. However, it should not be used on very soft mating surfaces or where electrical insulation is desired.
總體
材料狀態 • 已商用：當前有效
供貨地區 • 北美洲
性能特點 • 低摩擦系數 • 耐化學性良好 • 耐磨損性良好
• 泵件PTFE, 密封PTFE, 水箱PTFE, 電氣部件PTFE, 汽車領域的應用PTFE, 軸承PTFE • 密封 • 水箱
用途 • 電氣部件 • 汽車領域的應用：
• 軸承
• 電器用具 • 水暖器材
外觀 • 黑色
形式 • 可定制外形
加工方法 • 機器加工 • 擠出
物理性能 額定值單位制 測試方法
比重 2.09g/cm³ ASTM D792
吸水率 (24 hr) 0.0% ASTM D570
機械性能 額定值單位制 測試方法
抗張強度 (屈服) 12.4MPa ASTM D638
伸長率 (斷裂) 70% ASTM D638
摩擦系數 0.22 ASTM D1894
負載變形 (10 MPa) 3.00% ASTM D621
熱性能 額定值單位制 測試方法
線形膨脹系數 ASTM D696
流動: 26 到 93°C 0.00011cm/cm/°C
流動: 26 到 149°C 0.00011cm/cm/°C
橫向: 26 到 93°C 0.000085cm/cm/°C
橫向: 26 到 149°C 0.000088cm/cm/°C
導熱系數 0.65W/m/K ASTM C177
補充信息
Temperature, Typical Range: -400° to 550°F
Flammability, ASTM D635: non-flammable
Maximum Pressure(P): 1000 psi
Maximum Velocity with no load (V-SFM): 400 ft/min
Maximum PV (PxV): 10000 psi x ft/min
Shaft Hardness - Minimum: Rb25
Shaft Finish recommended: 8 ot 16 Ra
Shaft Material: Hard, mild and stainless steel
Chemical Resistance: Inert
Coef. of Friction, ASTM D1894, static & dynamic: 0.15 to 0.30
|
