99久久久无码国产精品,亚洲影院天堂,久久亚洲婷婷

PFA 950 HP Plus, ESCR（抗應力裂紋）, 抗溶解性 Teflon® PFA 950 HP Plus 全氟烷氧基 DuPont Fluoropolymers 產品說明 DuPont™ Teflon® PFA HP Plus fluoropolymer is a special purpose resin available in clear, 2.5-mm (0.1 in) pellets. This resin is similar to PFA HP with the additional benefits of improved flex life and chemical stress crack resistance. Teflon® PFA HP Plus meets the increasingly stringent requirements for ultra-reliable and non-contaminating parts, while retaining the same exceptional chemical resistance, high purity and protection against ionic contamination as PFA HP. The improved flex life and chemical resistance will reduce the cost of ownership of high purity fluid handling systems by reducing downtime caused by mechanical or chemical stresses. Parts molded with Teflon® PFA HP Plus have improved clarity and a smooth finish, which can further help prevent buildup of microbial contamination in water handling systems. The exceptional purity of Teflon® PFA HP Plus makes it suitable for applications that require low extractable fluorides, and freedom from other foreign materials. This product contains no additives and is designed for hostile chemical environments where purity in the parts-per-billion range is needed. An example is in fluid handling systems for the manufacture of semiconductors. Teflon® PFA HP Plus is preferred when extended service is required in hostile environments involving chemical, thermal, and mechanical stress. The excellent thermal stability of Teflon® PFA HP Plus results in better moldings and reduces metal pickup from processing equipment. Teflon® PFA HP Plus combines the processing ease of conventional thermoplastics with the properties similar to those of polytetrafluoroethylene. Properly processed products made from Teflon® PFA HP Plus resin provide the superior properties typical of fluoropolymer resins; retention of properties after service at 250°C (482°F), useful properties at -196°C (-320°F), and chemical inertness to nearly all industrial chemicals and solvents. Dielectric properties are excellent. Molded products have moderate stiffness and high ultimate elongation. In a flame situation, products of Teflon® PFA HP Plus resist ignition and do not themselves promote flame spread. When ignited by flame from other sources, their contribution to heat is very small and added at a slow rate with very little smoke. 總體材料狀態 • 已商用：當前有效供貨地區 • 北美洲 • 歐洲 • 南美洲 • 亞太地區 • 剛性，良好 • 耐化學性良好 • 延展性，高性能特點 • 高 ESCR（抗應力裂紋） • 熱穩定性，良好 • 抗溶解性 • 煙釋放，低用途 • 襯里 • 管道 • 零件裝置 • 閥門/閥門部件 • 管道系統外觀 • 清晰/透明形式 • 顆粒料加工方法 • 吹塑成型 • 擠出 • 壓縮模塑 • 管路擠壓成型 • 樹脂傳遞成型 • 注射成型物理性能額定值單位制測試方法比重 2.14g/cm³ ASTM D792 熔流率 (372°C/5.0 kg) 2.4g/10 min ASTM D1238 吸水率 (24 hr) 0.050% ASTM D570 機械性能額定值單位制測試方法抗張強度 ASTM D638 屈服, 23°C 13.8MPa 23°C 28.3MPa 200°C 15.2MPa 伸長率 ASTM D638 斷裂, 23°C 260% 斷裂, 200°C 450% 彎曲模量 ASTM D790 23°C 600MPa 200°C 50.3MPa 硬度額定值單位制測試方法硬度計硬度 (邵氏 D) 55 ASTM D2240 熱性能額定值單位制測試方法熔融溫度 285 到 300°C 線形膨脹系數 - 流動 ASTM D696 0 到 100°C 0.00015cm/cm/°C 100 到 150°C 0.00023cm/cm/°C 150 到 200°C 0.00029cm/cm/°C Teflon® PFA 950 HP Plus 2012年9月30日全氟烷氧基 DuPont Fluoropolymers 電氣性能額定值單位制測試方法體積電阻率 1.0E+18ohm•cm ASTM D257 介電強度 2 (0.254 mm) 79kV/mm ASTM D149 介電常數 ASTM D150 100 Hz 2.05 10 MHz 2.05 耗散因數 ASTM D150 100 Hz 0.00030 10 MHz 0.00030 可燃性額定值單位制測試方法極限氧指數 95% ASTM D2863

www.久_一道久久爱综合久久爱_91在现视频_国产精品视频tv - 91国产精品