|
Arlon® 25FR
聚四氟乙烯
Arlon-MED
產品說明
Arlon 25N and 25FR are woven fiberglass reinforced, ceramic-filled composite materials engineered for use in microwave and RF multilayer printed circuit boards. Combining a non-polar thermoset resin system with a controlled-expansion ceramic filler, 25N and 25FR offer low dielectric constant and loss combined with a low Thermal Coefficient of Dielectric Constant (TCEr) for signal stability over a wide ambient temperature range.
Designed for use in multilayer packages, 25N and 25FR offer prepregs that are identical in chemical composition and physical properties with their copper clad laminates for a completely homogeneous finished package for optimal signal integrity.
The low dielectric constant (Er) and loss properties, low thermal coefficient of dielectric constant (TCEr), and excellent physical stability characteristics offered by 25N and 25FR materials make them ideal for wireless and digital applications, such as cellular telephones, down converters, low noise amplifiers, antennas and other advanced des ign circuits.
Processing for 25N and 25FR materials is consistent with processing for standard high temperature thermoset based printed circuit board substrates.
總體
材料狀態 • 已商用：當前有效
供貨地區 • 北美洲 • 歐洲 • 亞太地區
填料/增強材料 • 玻璃纖維增強材料 • 陶瓷纖維填料
性能特點 • 尺寸穩定性良好 • 生產階段，快
用途 • 電氣/電子應用領域
UL 檔案號 • E80166
形式 • 顆粒料
物理性能 額定值單位制 測試方法
比重 2 1.80g/cm³ ASTM D792A
吸水率 3 (23°C, 24 hr) 0.090% Internal Method
揮發物 4 0.0%
機械性能 額定值單位制 測試方法
彎曲強度 (23°C) 241MPa ASTM D790A
薄膜 額定值單位制 測試方法
抗張強度 - MD 2 (屈服) 96.5MPa ASTM D882A
剝離強度 5 875.6N/m Internal Method
熱性能 額定值單位制 測試方法
線形膨脹系數 - 流動 Internal Method
-- 6 0.000016cm/cm/°C
-- 7 0.000018cm/cm/°C
-- 8 0.000059cm/cm/°C
-10 到 140°C 9 0.000050cm/cm/°C
導熱系數 (100°C) 0.45W/m/K ASTM E1225
電氣性能 額定值單位制 測試方法
表面電阻率 (0.305 mm) 8.9E+8ohm Internal Method
體積電阻率 (0.305 mm) 4.2E+8ohm•cm Internal Method
介電常數 10 (23°C, 10.0 GHz) 3.58 Internal Method
耗散因數 10 (10.0 GHz) 0.0035 Internal Method
可燃性 額定值單位制 測試方法
UL 阻燃等級 11 V-0 UL 94
補充信息 額定值單位制
Total Mass Loss 12 (125°C) > 0.24%
Water Vapor - Recovered 0.070%
1 / 2
Arlon® 25FR 2012年9月29日
聚四氟乙烯
Arlon-MED
備注
1 一般屬性：這些不能被視為規格。
2 23°C
3 E1/105 + D24/23
4 Maximum 0.10%
5 After Thermal Stress
6 X-axis
7 Y-axis
8 Z-axis
9 Adapted
10 C23/50
11 C48/23/50, E24/125,
12 < 10e-6 torr, Maximum 1.00%
|
