|
Rulon 957
聚四氟乙烯
Saint Gobain Performance Plastics
產品說明
Rulon® 957 is a speckled green material that was developed specifically for noise dampening and abrasion resistance, such as in commercial or residential clothes dryers.
It provides low friction operation on softer mating surfaces at higher loads than Rulon® J.
This material also offers excellent performance on coated metals, particularly porcelain. Among its many benefits are an overall reduction of the weight of the finished product, vibration absorption, and cost reduction due to rapid manufacturing methods.
總體
材料狀態 • 已商用：當前有效
供貨地區 • 北美洲
性能特點 • 低摩擦系數 • 降噪
• 減震 • 耐磨蝕性，良好
用途 • 電氣部件 • 孤立絕緣體 • 汽車領域的應用：
• 電器用具 • 密封 • 軸承
外觀 • 綠色
形式 • 可定制外形
加工方法 • 機器加工 • 擠出
物理性能 額定值單位制 測試方法
比重 2.24g/cm³ ASTM D792
吸水率 (24 hr) 0.0% ASTM D570
機械性能 額定值單位制 測試方法
抗張強度 (屈服) 15.2MPa ASTM D638
伸長率 (斷裂) 200% ASTM D638
摩擦系數 0.20 ASTM D1894
負載變形 (10 MPa) 4.00% ASTM D621
熱性能 額定值單位制 測試方法
線形膨脹系數 ASTM D696
流動: 26 到 93°C 0.00011cm/cm/°C
橫向: 26 到 93°C 0.000063cm/cm/°C
補充信息
Temperature, Typical Range: -400° to 550°F
Flammability, ASTM D635: non-flammable
Maximum Pressure(P): 1000 psi
Maximum Velocity with no load (V-SFM): 400 ft/min
Maximum PV (PxV): 10000 psi x ft/min
Shaft Hardness - Minimum: Rb25
Shaft Finish recommended: 8 ot 16 Ra
Shaft Material: Hard, mild and stainless steel adn porcelain coatings
Chemical Resistance: Good
Coef. of Friction, ASTM D1894, static & dynamic: 0.15 to 0.25
備注
1 一般屬性：這些不能被視為規格。
|
