|
DeWAL D/W 203
聚四氟乙烯
DeWAL Industries
產品說明
D/W 203 is an unsintered PTFE (Polytetrafluoroethylene) film used primarily for electrical insulation, particularly for wire and cable applications. The polymer is fibrilated giving good strength in the machine direction. It has the inherent benefits of PTFE: exceptional chemical resistance, extreme temperature range from 450F to +500F, low coefficient of friction, excellent drape characteristics and non-stick properties.
D/W 203 is used in cable insulation, harness wrap, and as the dielectric medium in coaxial cables. Once sintered, it seals completely to provide excellent electrical insulating properties, unsurpassed chemical resistance and excellent thermal resistance. DeWAL's unsintered PTFE tape has good drape characteristics allowing it to conform smoothly to complicated shapes. D/W 203 can be used for gaskets, expansion joints, valve seals and diaphragm applications. It is available unpigmented and pigmented to match EIA colors. It has good strength after sintering and is used where chemical inertness and high temperature resistance are needed.
總體
材料狀態 • 已商用：當前有效
供貨地區 • 北美洲 • 歐洲
性能特點 • 低摩擦系數 • 良好的強度 • 耐熱性，高
• 絕緣 • 耐化學性良好 • 無粘性
• 薄膜 • 電線電纜應用 • 密封
用途 • 電纜護套 • 墊圈
• 電器導線絕緣材料 • 隔膜
外觀 • 可用顏色
形式 • 薄膜
物理性能 額定值單位制
比重 1.50g/cm³
Thickness 50.8 到 508nm
薄膜 額定值單位制 測試方法
抗張強度 - MD (屈服) 13.8MPa ASTM D882
伸長率 - MD (斷裂) 35% ASTM D882
補充信息 額定值單位制
Backing Material Extruded PTFE Film
Core ID 7.62cm
Maximum Roll OD 279mm
Width 12.7 到 279mm
備注
1 一般屬性：這些不能被視為規格。
|
