|
Rulon 123
聚四氟乙烯
Saint Gobain Performance Plastics
產品說明
Rulon® 123 is a glossy black non-abrasive compound for softer mating surfaces, such as stainless steel. This material has excellent chemical resistance and is FDA, USDA, and NSF compliant. It is less expensive than Rulon J, but is slightly less flexible and higher in wear.
It has a high resistance to deformation, low coefficient of friction and good thermal and electrostatic dissipation. This material has a maximum operating temperature of 550°F (300°C).
Rulon 123 releases black wear debris over time and should not be used in ultra-dry, vacuum applications, or where electrical insulation is desired.
總體
材料狀態 • 已商用：當前有效
供貨地區 • 北美洲
性能特點 • 尺寸穩定性良好 • 光澤，高 • 耐磨蝕性，良好
• 低摩擦系數 • 耐化學性良好
• 泵件 • 密封 • 水箱
用途 • 電氣部件 • 汽車領域的應用：
• 軸承
• 電器用具 • 水暖器材
機構評級 • FDA 未評級 • NSF 未評級 • USDA Unspecified Approval
外觀 • 黑色
形式 • 可定制外形
加工方法 • 機器加工 • 擠出
物理性能 額定值單位制 測試方法
比重 2.11g/cm³ ASTM D792
吸水率 (24 hr) 0.0% ASTM D570
機械性能 額定值單位制 測試方法
抗張強度 (屈服) 17.2MPa ASTM D638
伸長率 (斷裂) 150% ASTM D638
摩擦系數 0.20 ASTM D1894
負載變形 (10 MPa) 2.50% ASTM D621
熱性能 額定值單位制 測試方法
線形膨脹系數 ASTM D696
流動: 26 到 93°C 0.00013cm/cm/°C
橫向: 26 到 93°C 0.000079cm/cm/°C
導熱系數 0.66W/m/K ASTM C177
補充信息
Temperature, Typical Range: -400° to 550°F
Flammability, ASTM D635: non-flammable
Maximum Pressure(P): 1000 psi
Maximum Velocity with no load (V-SFM): 400 ft/min
Maximum PV (PxV): 10000 psi x ft/min
Shaft Hardness - Minimum: Rb25
Shaft Finish recommended: 8 ot 16 Ra
Shaft Material: steel
Chemical Resistance: Inert
Coef. of Friction, ASTM D1894, static & dynamic: 0.10 to 0.30
備注
1 一般屬性：這些不能被視為規格。
1 / 1
|
